CROMOFIX 69 T 001导电聚乙烯

更新时间：2013-12-11 16:40:22

Electroconductive Carbon
Black Concentrate高导电碳黑浓缩料

CROMOFIX 69 T 001

MATERIAL DATA SHEET

材料数据单

CROMOFIX 69 T 001is a compound of electro-conductive carbon
black in low density polyethylene resin.

CROMOFIX 69 T 001是高导电碳黑和低密度聚乙烯组成的色母粒。

Informative parameters  主要参数

*Internal methodaccording to ISO 3915; measured on extruded
sheets or injection molded plates

Note:parameters shown
in the table are typical values for this product

 

Processing
 

CROMOFIX 69 T 001can be processed on
conventional equipment for extrusion or injection moulding. Recommended
processing temperature is in the range of 160-190°C.
 加工：可用常规挤出成型或注塑成型设备加工，推荐加工温度范围是160-190°C.
 

Drying
 

Drying is not necessary. If material
accidentally came in contact with moisture, dry the granules at 70-80°Cfor 2-4 hours.

干燥：通常不必干燥，如果材料意外进水,可将颗粒在70-80°C下干燥2-4个小时。
 

Storage
 

CROMOFIX 69 T 001should be stored in dry conditions at temperatures below40°Cand protected from
UV-light. Improper storage can initiate degradation, which results in odour
generation and can have negative effect on product properties. Contact with
open fire should be avoided. Shelf life at normal conditions is 2 years. After
this period it is necessary to test the product properties.

仓储：应存放在干燥避光的条件下，温度小于40℃。不当的储藏可以引发降解，导致异味产生，并能对产品性能产生负面影响。避免接触明火。保质期在正常情况下为2年。在此期限之后，需要测试产品性能。

 

Safety
 

The product is not classified as
dangerous. Please see product "Safety data sheet" for details on
various aspects of safety.

安全：该产品不属于危险品，有关安全的各个方面的细节请参阅产品的“安全数据表”。